The China Clutch Disc controls power transmission through the clutch and release, allowing the vehicle to accelerate and decelerate smoothly while ensuring that the driver can more easily control the vehicle.
The OEM quality clutch kit generally refers to clutch friction plates, clutch pressure plates, and clutch release bearings. The clutch pressure plate is the most important part of the clutch assembly, which directly determines whether the clutch installation is shaking, whether it is heavy, and whether it is used for a long time. The quality of the clutch friction plates in the OEM quality clutch kit will determine the overall life of the clutch and the effect of damping and noise reduction. The clutch release bearing is an important part of the clutch release system, and its quality determines the separation efficiency of the clutch system and the wear rate of the pressure plate separation.
When replacing the clutch kit normally, you need to replace three parts, the pressure plate, the friction plate, and the release bearing. These are also called the clutch three-piece set. When replacing, you need to pay attention to the following three aspects.
First of all, the OEM quality clutch kit ensures that the car starts smoothly: this is the main function of the clutch. After the engine is started and before the car starts, the driver first steps on the clutch pedal, disengages the clutch, disengages the engine and the driveline, then shifts the transmission into gear, and then gradually releases the clutch pedal to gradually engage the clutch kit.